features low forward voltage drop,low power losses high efficiency operation high forward surge capability solder dip 275 max. 10s,per jesd 22-b106 accordance to weee 2002/96/ec mechanical data case: jedec r-6 molded plastic polarity: color band denotes cathode weight: 0.07 ounces , 2.1 grams mounting position: any maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% symbol unit v rrm v v rms v v dc v i f(av) i f(av) i fsm a i f =5.0a i f =7.5a i f =15a i f =5.0a i f =7.5a i f =15a t a =25 a t a =125 ma typical junction capacitance c j pf r ja (3) r jl (3) r jl (4) /w top tj tstg (2) pulse test:40ms pulse width (3) without heatsink,free air,units mounted on pcb with 2 mm 2 mm copper pad areas at 9.5 mm lead length (4) leads clipped at 3 mm lead length from plastic body on 7.0 cm 2.2 cm 1.9 cm 2 heatsink (5) meets the requirements of iec 61215 ed. 2 bypass diode thermal test (6).the typical data above is for reference only( ?). rev. 7, 16-mar-2017 notes:(1) pulse test:300 s pulse width ,1% duty cycle junction temperature in dc forward current without reverse bias, t1h (fig. 2) (note 5) 200 storage temperature range -40 to +175 typical thermal resistance 2.5 operating junction temperature range -40 to +150 thermal resistance 55 /w 3.5 800 (max.) 7.5 (typ.) 25 (max.) 4.0 v, 1 mhz 1290 (typ.) reverse current (note 2) v r =45v i r 11.6 (typ.) v 0.46 (typ.) 0.51 (typ.) 0.59 (max.) 0.33 (typ.) 0.36 (typ.) 0.44 (typ.) 0.54 (max.) peak forward surge current 8.3ms single half sine-wave super imposed on rated load(jedec method) 200 instantaneous forward voltage (note 1) t a =25 v f 0.44 (typ.) t a =125 maximum average forward (with heatsink) 15 a rectified current (without heatsink, free air) 6 maximum rms voltage 31.5 maximum dc blocking voltage 45 characteristics 15tq045 maximum recurrent peak reverse voltage 45 15tq045 photovoltaic solar cell protection schottky rectifier reverse voltage - 45volts forward current - 15.0 amperes trench mos schottky technology compliant to rohs directive 2002/95/ec and in dimensions in inches and (millimeters) r - 6 t c measurement point
rating and charactertic curves 15tq045 the curve graph is for reference only, can't be the basis for judgment( ?)! rev. 7, 16-mar-2017 a verage forward current(a) a verage power loss w fig.3-forward power loss characteristics 10 2 0 8 6 4 02 4 6 8 10 12 14 16 18 d=0.1 d=0.3 d=0.2 d=0.5 d=0.8 d=1.0 instantaneous reverse current ( a) fig.4-typical reverse leakage characteristics percent of rated peak reverse 20 30 40 50 60 70 80 90 100 10 100 100000 1 1000 10000 t a =1 50 t a =100 t a =12 5 t a =25 instantaneous forward current (a) instantaneous forward voltage(v) fig.5-typical instantaneous forward characteristics 0.3 0.4 0.5 0.6 0.7 0.8 0.2 1 10 100 0.1 0.1 t a =150 t a =125 t a =100 t a =25 a verage forward current amperes fig.1-forward current derating curve a mbient temperature ( ) 4.0 1.0 0 5.0 3.0 2.0 6.0 0 25 50 75 100 125 150 175 free air ,without heatsink junction capacitance (pf) fig.6-typical junction capacitance reverse voltage (v) t j =25 f=1mhz vsig=50mav p-p 100 1000 10000 0.1 1 4 10 100 a mbient temperature ( ) percentage of rated current(%) fig.2-rated forward current vs. ambient temperature 100 20 0 80 60 40 120 0 25 50 75 100 125 150 175 200 dc current with heatsink
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
